Home » Electrical » Product Sales
Kanoo Energy – ELECTRICAL & DIAGNOSTICS offers a wide range of products and specialized electrical services to all segments of industries, including Oil and Gas, Petrochemicals, Mining, Power Generation, Transmission and Distribution, Desalination, Secondary Industries, EPC, etc.
We have the following products that are classified under:
Kanoo Energy is partnered with Yamuna Densons in KSA. Al Yamuna Densons is the brand that pioneers itself into new depths. We are grateful for the support our clientele has provided us with and are content with the reputation that we have built over the years.
We are a one–stop shop for all kinds of power cable jointing accessories, such as Resin Pour, Tapex, Heat Shrinkable, Pre-Moulded, and Cold Shrink, covering LV and MV up to 36KV.
In Saudi Arabia, Kanoo Energy has partnered with PMA, an ABB company based in Switzerland. They have an excellent reputation in the market for their high-quality Polyamide products. They have developed, produced, and sold top-quality cable protection systems since 1975.
Their wide range of products gives customers worldwide the protection they need in railways, power distribution, mechanical engineering, and shipbuilding applications. PMA products are the ideal solution and obvious choice for automation, building installations, and other projects where power and data cables require dependable protection.
Kanoo Energy has partnered with Highstep Systems. The Highstep Lift is the world’s first mobile, battery-powered service lift for all types of structures and towers. It is 10x faster than climbing manually.
Safety :
The Highstep System is a unique fall protection system for safe, efficient, and ergonomic access to difficult-to-reach workplaces that are at a height.
All Highstep products are TÜV-certified and meet the latest and most stringent requirement standards.
Kanoo Energy completed a pilot project in SEC for retrofilling mineral oil transformers with ester-based fluids.
Positron is our principal partner for Live Line Puncture Insulator Detector (PID)
Kanoo Energy completed a pilot project in SEC for retrofilling mineral oil transformers with ester-based fluids.
The only TRIPLE CERTIFIED. Arc Flash suit on the market:
NFPA 70E (USA), IEC 61482-2 (Europe), SANS 724 (South Africa).
Variety:
(NFPA 70E, ASTM F1959, F1930, F2621, F2413, EN ISO 20345)
High-insulating telescopic rod type PE-PVR/200U-TEL made of synthetic resin reinforced by fibreglass tubes certified in conformity with the International Standard CEI EN 61235/EC 61235 base element and IEC 60855-1 upper element.
Maximum extended length 2 m, folded length about 1.1 m;
composed of:
– base element external diameter 40 mm, yellow colour, with lower rubber cap and hand guard;
– upper element external diameter 32 mm, orange colour, a tube filled by closed cells polyurethane foam, with a universal head for fixing the voltage detector type RMT1030/U.
– double locking system to work at different extensions of the stick.
– weight about 1.7kg.
NOTE: CUSTOM DESIGNED TOOL KITS AVAILABLE ON REQUEST
Note: Natural Latex Insulating Gloves Also Available
Made entirely of resistant plastic material, with shock resistant properties. It is strong enough to be used as a carrying box. Equiped of 4 pre-drilled holes for a wall mount. Fitted with a retaining lug to hold the gloves when the box is opened. The box is delivered with a powder flask.
New design
The transparent anti-UV window is for checking the presence of the gloves Integrated and retractable handle.
CE marking / EN 420 / EN 388 (mechanical protection: Abrasion 2-Slicing 1-Tear 2 – Perforation 2)
The gloves assure a mechanical protection of latex insulating gloves.
Full grain leather 5 finger gloves, water repellant and siliconized for better flame resistance Wing thumb, 100 mm split leather cuff, tightening strap on the back of the hand.
Our insulated gloves are well-fitted and available in various sizes in accordance with the entire class of lineman gloves.
The purpose of the tester is to ensure that the glove is absolutely air-tight.
Moulded plastic body:
– truncated end with two grooves for holding the glove under test
– a central piston at the bottom of the tester
– a flexible valve at the bottom of the bowl on the upper part
two rubber rings to hold the glove during inflation.
– 2 x 2 small channels for cables or pipes up to a diameter of 40 mm
– 2 channels for cables or pipes up to 92 mm in diameter
– Adapted to extreme temperatures, especially in a high desert climate
– High UV resistance: no color vanishing and long-lasting performances
– Low profile: 120 mm at the top of the lid
– Removable covering flap for easy maintenance
– Built-in reflectors to maximize safety by night
– Integrated carrying handle
Safety helmet:
EN 397, EN 50365 (Class 0-1 KV for use), ANSI Z89.1 (Class E-tested up to 20 KV)
Face-shield:
EN 166: 2002, EN 170, ANSI Z87.1
ASTM F 2178 (ATPV = 17 Cal/cm²) with chin protector, according to reference, GS-ET-29 (class 2/4kA, during 0,5 sec)
IEC 60855-1 / EN 50508
For no-voltage testing from 20 kV to 400 kV in all weathers. Also suitable for earthing, disconnector operation.
Foam-filled fibreglass composite tube, IEC 60855-1,039 and 32 mm (end section). Dielectric strength 100 kV/30 cm after wet conditioning Neoprene protective skirts.
Rubber hand guard marking the limit of where to place the hands. Shaft covered with non-slip sheath.
RTTE sticks can be supplied off the shelf with these end fittings:
– U notched universal end fitting.
– APV: multi-purpose, 12 mm 6-sided with automatic locking.
– B bayonet end fitting.
– EAF multi-purpose, 21 mm 6-sided.
IEC 60855-1 / EN 50508
For no-voltage testing from 20 kV to 400 kV in all weathers. Also suitable for earthing, disconnector operation.
Foam-filled fibreglass composite tube, IEC 60855-1,039 and 32 mm (end section). Dielectric strength 100 kV/30 cm after wet conditioning Neoprene protective skirts.
Rubber hand guard marking the limit of where to place the hands. Shaft covered with non-slip sheath.
RTTE sticks can be supplied off the shelf with these end fittings:
– U notched universal end fitting.
-APV: multi-purpose, 12 mm 6-sided with automatic locking.
-B bayonet end fitting.
-EAF multi-purpose, 21 mm 6-sided.
BATTERY POWERED HOT STICK TESTER
Earthing and short-circuiting device, with spring line clamps
Earthing and short-circuiting system for MV substations
Temporary short-circuiting and earthing device, installed from ground, for LV flag – type lines
Earthing to post for overhead lines
Earthing and short-circuiting equipment for bare LV overhead cables
Earthing and short-circuiting device, with spring line clamps
Earthing to post for overhead lines
Earthing and short-circuiting equipment for bare LV overhead cables
Earthing and short-circuiting system for MV substations
Temporary short-circuiting and earthing device, installed from ground, for LV flag – type lines
Earthing and short-circuiting device, with spring line clamps
Earthing and short-circuiting system for MV substations
Temporary short-circuiting and earthing device, installed from ground, for LV flag – type lines
Earthing to post for overhead lines
Earthing and short-circuiting equipment for bare LV overhead cables
Kanoo Energy is partnered with Yamuna Densons in KSA. Al Yamuna Densons is the brand that pioneers itself into new depths. We are grateful for the support our clientele has provided us with and are content with the reputation that we have built over the years.
We are a one–stop shop for all kinds of power cable jointing accessories, such as Resin Pour, Tapex, Heat Shrinkable, Pre-Moulded, and Cold Shrink, covering LV and MV up to 36KV.
In Saudi Arabia, Kanoo Energy has partnered with PMA, an ABB company based in Switzerland. They have an excellent reputation in the market for their high-quality Polyamide products. They have developed, produced, and sold top-quality cable protection systems since 1975.
Their wide range of products gives customers worldwide the protection they need in railways, power distribution, mechanical engineering, and shipbuilding applications. PMA products are the ideal solution and obvious choice for automation, building installations, and other projects where power and data cables require dependable protection.
Kanoo Energy has partnered with Highstep Systems. The Highstep Lift is the world’s first mobile, battery-powered service lift for all types of structures and towers. It is 10x faster than climbing manually.
Safety :
The Highstep System is a unique fall protection system for safe, efficient, and ergonomic access to difficult-to-reach workplaces that are at a height.
All Highstep products are TÜV-certified and meet the latest and most stringent requirement standards.
Kanoo Energy completed a pilot project in SEC for retrofilling mineral oil transformers with ester-based fluids.
Positron is our principal partner for Live Line Puncture Insulator Detector (PID)
Kanoo Energy completed a pilot project in SEC for retrofilling mineral oil transformers with ester-based fluids.
The only TRIPLE CERTIFIED. Arc Flash suit on the market:
NFPA 70E (USA),
IEC 61482-2 (Europe),
SANS 724 (South Africa).
Variety:
(NFPA 70E, ASTM F1959, F1930, F2621, F2413, EN ISO 20345)
3 to 69 kV and 5 to 36 kV Options
High-insulating telescopic rod type PE-PVR/200U-TEL made of synthetic resin reinforced by fibreglass tubes certified in conformity with the International Standard CEI EN 61235/EC 61235 base element and IEC 60855-1 upper element.
Maximum extended length 2 m, folded length about 1.1 m;
composed of:
– base element external diameter 40 mm, yellow colour, with lower rubber cap and hand guard;
– upper element external diameter 32 mm, orange colour, a tube filled by closed cells polyurethane foam, with a universal head for fixing the voltage detector type RMT1030/U.
– double locking system to work at different extensions of the stick.
– weight about 1.7kg.
NOTE: CUSTOM DESIGNED TOOL KITS AVAILABLE ON REQUEST
Note: Natural Latex Insulating Gloves Also Available
Made entirely of resistant plastic material, with shock resistant properties. It is strong enough to be used as a carrying box. Equiped of 4 pre-drilled holes for a wall mount. Fitted with a retaining lug to hold the gloves when the box is opened. The box is delivered with a powder flask.
New design
The transparent anti-UV window is for checking the presence of the gloves Integrated and retractable handle.
CE marking / EN 420 / EN 388 (mechanical protection: Abrasion 2-Slicing 1-Tear 2 – Perforation 2)
The gloves assure a mechanical protection of latex insulating gloves.
Full grain leather 5 finger gloves, water repellant and siliconized for better flame resistance Wing thumb, 100 mm split leather cuff, tightening strap on the back of the hand.
Our insulated gloves are well-fitted and available in various sizes in accordance with the entire class of lineman gloves.
The purpose of the tester is to ensure that the glove is absolutely air-tight.
Moulded plastic body:
– truncated end with two grooves for holding the glove under test
– a central piston at the bottom of the tester
– a flexible valve at the bottom of the bowl on the upper part
two rubber rings to hold the glove during inflation.
– 2 x 2 small channels for cables or pipes up to a diameter of 40 mm
– 2 channels for cables or pipes up to 92 mm in diameter
– Adapted to extreme temperatures, especially in a high desert climate
– High UV resistance: no color vanishing and long-lasting performances
– Low profile: 120 mm at the top of the lid
– Removable covering flap for easy maintenance
– Built-in reflectors to maximize safety by night
– Integrated carrying handle
Safety helmet:
EN 397, EN 50365 (Class 0-1 KV for use), ANSI Z89.1 (Class E-tested up to 20 KV)
Face-shield:
EN 166: 2002, EN 170, ANSI Z87.1
ASTM F 2178 (ATPV = 17 Cal/cm²) with chin protector, according to reference, GS-ET-29 (class 2/4kA, during 0,5 sec)
IEC 60855-1 / EN 50508
For no-voltage testing from 20 kV to 400 kV in all weathers. Also suitable for earthing, disconnector operation.
Foam-filled fibreglass composite tube, IEC 60855-1,039 and 32 mm (end section). Dielectric strength 100 kV/30 cm after wet conditioning Neoprene protective skirts.
Rubber hand guard marking the limit of where to place the hands. Shaft covered with non-slip sheath.
RTTE sticks can be supplied off the shelf with these end fittings:
– U notched universal end fitting.
– APV: multi-purpose, 12 mm 6-sided with automatic locking.
– B bayonet end fitting.
– EAF multi-purpose, 21 mm 6-sided.
IEC 60855-1 / EN 50508
For no-voltage testing from 20 kV to 400 kV in all weathers. Also suitable for earthing, disconnector operation.
Foam-filled fibreglass composite tube, IEC 60855-1,039 and 32 mm (end section). Dielectric strength 100 kV/30 cm after wet conditioning Neoprene protective skirts.
Rubber hand guard marking the limit of where to place the hands. Shaft covered with non-slip sheath.
RTTE sticks can be supplied off the shelf with these end fittings:
– U notched universal end fitting.
-APV: multi-purpose, 12 mm 6-sided with automatic locking.
-B bayonet end fitting.
-EAF multi-purpose, 21 mm 6-sided.
BATTERY POWERED HOT STICK TESTER
Earthing and short-circuiting device, with spring line clamps
Earthing and short-circuiting system for MV substations
Temporary short-circuiting and earthing device, installed from ground, for LV flag – type lines
Earthing to post for overhead lines
Earthing and short-circuiting equipment for bare LV overhead cables
Earthing and short-circuiting device, with spring line clamps
Earthing to post for overhead lines
Earthing and short-circuiting equipment for bare LV overhead cables
Earthing and short-circuiting system for MV substations
Temporary short-circuiting and earthing device, installed from ground, for LV flag – type lines